Water-Resistant Power Adapter and RGB Controller with Remote Control
- SKU
- 4396
- Marca
- Ledmarket
- Pedido mínimo
- 2
Precio a consultar
Las condiciones mayoristas de este artículo se preparan bajo solicitud. Añádalo a su lista con la cantidad que necesita.
Stock en origen (minorista): En stock en origen. El stock minorista en origen no garantiza la disponibilidad de cantidades mayoristas.
Envío cotizado por separado
Descripción
Power Adapter and RGB Controller for 5050 Waterproof 220V LED Strip –
An RGB power adapter and controller designed for connecting and operating a 5050 RGB waterproof LED strip at 220V. The unit combines power supply with color control, allowing you to turn the strip on and off, select colors, change brightness, and activate dynamic effects using the infrared remote control included in the kit.
Complete RGB Strip Control via a Single Unit
The adapter connects between the mains power and the RGB strip, transmitting the necessary control signal to operate the color channels. Using the remote, you can toggle between fixed colors, choose variable lighting modes, and control the speed and intensity of the light according to the atmosphere you wish to create.
Designed for 4-Wire 220V RGB Strips
The controller is designed to work with compatible RGB strips at 220V with a four-contact connection. It is particularly suitable for the protected 5050 RGB LED strip sold on the site, transforming the strip from a simple colored light source into a lighting system that can be conveniently controlled via remote.
Product Details
Key Advantages
- Power Adapter and Controller in One Unit: Connects the RGB strip to the mains voltage and enables control over colors and lighting modes.
- Includes IR Remote: Convenient remote control without needing to reach the controller itself.
- Color Selection: Allows choosing a variety of fixed RGB colors directly from the remote.
- Brightness Control: Lighting intensity can be increased or decreased.
- Dynamic Modes: Includes FLASH, STROBE, FADE, and SMOOTH modes.
- Effect Speed Control: Allows adjusting the transition rate between colors in dynamic modes.
- Maximum Power up to 1500W: According to controller specifications.
- 4-Pin Connection: Designed for compatible RGB strips.
What's Included?
- Power supply unit and RGB controller
- Infrared remote for color and effect control
- 4-pin connector for RGB strip
- Power connection according to unit structure
Color and Effect Control
The included remote allows you to choose fixed colors and activate several variable lighting modes. Additionally, you can control the lighting intensity and the transition speed between colors, moving from steady lighting to a colorful, dynamic effect depending on the use.
The remote includes, among others, FLASH, STROBE, FADE, and SMOOTH modes, alongside RGB buttons and additional color selections.
Specially Designed for 5050 Waterproof 220V RGB Strips
The adapter is intended to serve as the power and control accessory for compatible 220V RGB LED strips. If you are purchasing an RGB strip at a desired length and want to control its color and effects, this is the component that connects the strip to electricity and enables control via the remote.
For a 5050 RGB strip with a maximum power of 14W per meter, the length of the strip must be matched to the total power and the controller limit. Follow the maximum allowed length of the LED strip itself.
Technical Specifications
| Product Type | Power Adapter and RGB Controller |
| Intended Use | Compatible 5050 RGB LED Strip |
| Operating Voltage | 220V AC |
| Frequency | 50/60Hz |
| Output | RGB Signal |
| Strip Connection Type | 4 Pins / 4 Contacts |
| Control | IR Remote |
| Remote Range | Up to approx. 5 meters depending on usage conditions |
| Maximum Power | 1500W |
| Operating Temperature | -20°C to 60°C |
| Lighting Modes | Fixed colors and FLASH / STROBE / FADE / SMOOTH modes |
Before Connecting to the Strip
It is important to ensure that the sequence of the four contacts in the connector matches the markings on the RGB strip. Align the connector according to the connection markings and do not force the pins.
When connecting or disconnecting the strip, perform the action while the system is disconnected from the power. Once the connection is complete, the power unit can be plugged in and the strip operated via the remote.
Frequently Asked Questions
Is this a power supply for an RGB strip?
This is a power adapter that also includes an RGB controller. It is used to connect the strip to 220V voltage and simultaneously allows control over colors and effects via the included remote.
Is the remote included?
Yes. The product includes an infrared remote to control colors, brightness, and dynamic modes.
Which strip is this product compatible with?
The adapter is designed for compatible 5050 RGB LED strips at 220V with a four-contact connection.
Can I choose a fixed color?
Yes. You can choose a fixed color directly from the remote, alongside using color-changing effects.
Can the speed of color changes be modified?
Yes. In dynamic lighting modes, the speed of the effects can be controlled via the remote.
Can the lighting intensity be controlled?
Yes. The remote includes an option for controlling light intensity.
Is the adapter itself waterproof?
The IP protection of the LED strip does not automatically apply to the controller, adapter, and connections. The control unit and connections must be installed in a protected, dry location according to the installation instructions.
Important to know: This product is a power adapter and controller for RGB strips and does not include the LED strip itself.
Safety: The product operates at 220V mains voltage. Connections should only be made when the system is disconnected from power and installed according to infrastructure and safety regulations. It is recommended that connection and installation be performed by a qualified electrician.
*Images are for illustrative purposes only.