Aluminum Profile for LED Lighting 10x20 mm – Body Only (Without LED and Without Transformer)
- Réf.
- 4212AL
- Marque
- Ledmarket
- Poids
- 3 kg
- Commande minimale
- 2
Prix sur demande
Les conditions de gros de cet article sont établies sur demande. Ajoutez-le à votre liste avec la quantité souhaitée.
Stock à la source (détail): En stock à la source. Le stock de détail à la source ne garantit pas la disponibilité de grandes quantités.
Transport chiffré séparément
Description
Narrow Infrastructure for Clean Lighting Lines in the Space
Aluminum profile for LED lighting allows for the creation of lighting infrastructure with clean lines within the ceiling or the built element. Its narrow structure is suitable for precise architectural work, where even finishing details have a place in home design. It is designed for installation in plasterboard, concrete, wood, and joinery ceilings, allowing it to be integrated as part of the spatial planning. The profile is supplied as a body only, without LED and without transformer, therefore the lighting components must be planned separately.
Small Detail that Integrates into the Large Design
The cross-section dimensions of the profile are 20x10 mm, allowing for the integration of narrow infrastructure within the planned element. Instead of treating lighting as a separate addition, it can be given a place already in the ceiling or joinery planning. The full length of 3 meters provides a profile unit that can be taken into account when determining the lighting lines in the project. Before ordering, it is advisable to check the dimensions and the installation site to ensure that the profile fits the built detail.
Milky Cover and Neat Finish at the Edges
The profile includes a milky plastic cover, designed for uniform light distribution when lighting is integrated. The cover is part of the light appearance design, but it does not replace the need to select the lighting components themselves. The included end caps provide an aesthetic closure on both sides of the profile. Thus, consideration is given to the finish of the line, and not just to the infrastructure within which the lighting will be installed.
Product Details
Key Advantages
- Aluminum profile creates a dedicated infrastructure for LED lighting as part of the home lighting design.
- Narrow cross-section of 20x10 mm dimensions allows for placing the lighting line within a precise architectural detail.
- Full length of 3 meters allows for planning the profile's position relative to the length of the built element.
- Milky plastic cover is designed for uniform light distribution after integrating the lighting into the profile.
- End caps close both sides of the profile and provide the line with an aesthetic finish.
- Possibility of installation in plasterboard, concrete, wood, and joinery allows the profile to be integrated into a variety of planned details in the home.
Particularly Suitable For
- Plasterboard ceilings where a lighting line is planned to be integrated as part of the structure and not as a separate addition.
- Concrete ceilings where a narrow infrastructure for LED lighting is required according to project details.
- Wood elements where clean lines are desired even in lighting design.
- Joinery work where space is pre-allocated for the profile and accompanying lighting components.
- Architectural projects where neat closure of the lighting profile ends is important.
Technical Specifications
| Product Type | Profile for LED lighting, body only |
|---|---|
| Material | Aluminum |
| Cross-section Dimensions | 20x10 mm |
| Length | 3 meters |
| Cover | Milky plastic for uniform light distribution |
| Included Accessories | End caps for closure on both sides of the profile |
| Installation Surfaces | Plasterboard, concrete, wood, and joinery ceilings |
| Unit Content | Full profile unit with cover and end caps, without LED and without transformer |
Frequently Asked Questions
Can the profile be operated immediately upon receipt?
No, this is a profile only and not a fixture with installed lighting. It is supplied without LED and without transformer, therefore separate matching of lighting components is required before installation and operation.
What should be measured before ordering?
It is advisable to check the installation site relative to the 20x10 mm cross-section and the 3-meter length. A preliminary check of the planned detail will help ensure there is room for the profile within the ceiling or joinery work.
What is included besides the aluminum profile?
The unit includes a milky plastic cover for uniform light distribution. Additionally, end caps are attached, intended for aesthetic closure on both sides of the profile.
Can the order be canceled after it is placed?
An order cannot be canceled after it is placed, as each profile is cut and manufactured according to the customer's order. Therefore, it is recommended to complete the compatibility check for the project before placing the order.
How is the delivery carried out?
Delivery will be made at one of the chain's branches. Delivery of profiles with a length of 300 cm may involve an additional fee, so it is advisable to inquire about the details in advance.
How can one consult regarding compatibility for the project?
For questions and consultation before ordering, you can contact us at 053-3475060. The images are for illustration only, therefore it is recommended to base the compatibility check on the dimensions and content detailed on the page.
Important to know: Installation of the light fixture should be carried out in accordance with the electrical infrastructure and safety regulations. It is recommended to perform installation via a certified electrician.
*Images are for illustration purposes only.