LED DRIVER 36-42W 600ma 38-65V DC
- SKU
- 598
- ब्रांड
- Ledmarket
- न्यूनतम ऑर्डर
- 2
मूल्य अनुरोध पर
इस उत्पाद की थोक शर्तें अनुरोध पर तैयार की जाती हैं। आवश्यक मात्रा के साथ इसे अपनी सूची में जोड़ें।
स्रोत पर स्टॉक (खुदरा): स्रोत पर स्टॉक में. स्रोत पर खुदरा स्टॉक थोक मात्रा की उपलब्धता की गारंटी नहीं है।
शिपिंग का मूल्य अलग से बताया जाएगा
विवरण
Compatible Driver for Stable Operation of LED Fixtures
LED driver with a rated power of 36–42W, designed for operating LED lighting fixtures that require an output current of 600mA and a suitable voltage range. The driver converts mains voltage to the DC voltage required by the lighting system and allows for the replacement of an existing driver when the electrical data of the lighting fixture matches the specification.
Correct Matching Starts with Output Data
The driver indicates an output voltage of DC36–64V and an output current of 600mA ±5%. When replacing an existing driver, it is particularly important to compare the current and voltage data to the original driver and not rely solely on the power in Watts. Using a driver that does not match the requirements of the LED fixture may cause improper operation of the LED system.
Wide Input Range for Mains Connection
The driver is marked for AC170–265V input at 50/60Hz frequency, and is suitable for use in LED lighting systems whose specifications require the output data shown on it. The enclosed structure of the driver allows for integration inside the lighting fixture or at the installation site intended for it, depending on the existing product structure.
Product Details
Key Advantages
- Rated Power 36–42W: Designed for LED systems suitable for the power range and output data of the driver.
- Output Current 600mA: A key figure that must be matched to the original driver and the LED system.
- Output Range DC36–64V: According to the marking on the driver body.
- Input Range AC170–265V: At an operating frequency of 50/60Hz.
- Solution for Replacing Existing Driver: Suitable when the required voltage, current, and power match.
- Built-in Connections: The driver includes input and output connections as part of the unit.
Why is it Important to Check Compatibility Before Replacement?
With LED drivers, it is not enough to choose a product based on the number of Watts alone. You must ensure that the new driver matches the output current and the voltage range required by the lighting fixture. In this case, the driver provides 600mA and is marked for an output range of DC36–64V. It is recommended to compare these figures to the driver being replaced before placing an order.
Recommended Uses
The driver is intended for repair and replacement in LED lighting fixtures designed to work with a driver having compatible data. It can fit a variety of lighting fixtures where the driver is installed as a separate component, as long as the requirements of the lighting fixture are within the range of the data appearing in the specifications.
Technical Specifications
| Product Type | LED DRIVER |
| Model | OT-36-42W |
| Rated Power | 36–42W |
| Input Voltage | AC170–265V |
| Frequency | 50/60Hz |
| Output Voltage | DC36–64V |
| Output Current | 600mA ±5% |
Frequently Asked Questions
Is the driver suitable for any 36–42W LED fixture?
Not necessarily. Beyond the power, you must also check the output current and the voltage range required by the lighting fixture. This driver is marked for 600mA and DC36–64V.
How do I know if it is suitable to replace the existing driver?
It is recommended to compare the data printed on the existing driver to the data of this product. Particular emphasis should be placed on the output current, voltage range, and power.
Can the driver be used if the voltage matches but the current is different?
Do not assume that matching voltage alone is sufficient. The output current is an essential part of matching the LED system, so full compatibility must be verified before connection.
Can I replace the driver myself?
Replacing a driver involves connection to the electrical system of the lighting fixture. It is recommended to perform the installation through a suitable professional and ensure full disconnection of the electricity before handling.
Important to Know: The product shown in the image indicates an output voltage of DC36–64V and a current of 600mA ±5%. It is recommended to check the data against the original driver before ordering.
Installation: The connection must be performed according to the lighting fixture data and the electrical infrastructure. it is recommended that installation and replacement be performed by a certified electrician.
*Images for illustration purposes only.