Skip to content
LEDMARKET
Fast Glue Set with Activator – SAIGAO ACTIVATOR 705

Fast Glue Set with Activator – SAIGAO ACTIVATOR 705

Cikkszám
50
Márka
Ledmarket
Minimális rendelés
2

Ár ajánlatkérésre

A termék nagykereskedelmi feltételeit kérésre állítjuk össze. Adja hozzá a listához a szükséges mennyiséggel.

Készlet a forrásnál (kiskereskedelmi): Raktáron a forrásnál. A forrás kiskereskedelmi készlete nem garantálja a nagy tételek elérhetőségét.

A szállítási díjat külön ajánljuk

Leírás

Quick Bonding Set for Precise Work in Home and Workshop

The 705 rapid cyanoacrylate glue set along with 705 ACTIVATOR organic accelerator spray provides strong bonding within seconds and is particularly suitable for carpentry, precise repairs, and smart assemblies. The combination between dropper glue and accelerator allows for clean and efficient work, with quick grip and significant time savings.

Strong and Clean Connection with Minimum Mess

The glue dries to a transparent finish and allows for precise point connections, especially on edges, rims, and corner works. The result looks neat, without the need for prolonged clamping or clamps over time, and is suitable for both installers and quick DIY repairs.

Simple Use Producing Immediate Result

Work in short and clear stages: cleaning and preparation, thin application of the glue, gentle spray of the accelerator, and bonding. This provides a quick grip that allows proceeding with work without waiting long, performing assemblies and repairs in a natural flow.

Product Details

Advantages

  • Immediate Bonding Quick attachment using glue and accelerator combination.
  • Strong and Clean Connection Minimum mess and transparent finish after drying.
  • Multi-purpose Suitable for wood, MDF, metals, rubber, cardboard, rigid foam, and certain plastics.
  • Effective for Edges and Corners Excellent solution for rims, small repairs, and point connections.
  • Work Time Savings No need for prolonged clamping or clamps over time.
  • Suitable for Professionals and Hobbyists Useful tool for carpenters, installers, kitchen contractors, and for DIY work.

Recommended Uses

  • Carpentry and point bonding in wood and MDF.
  • Precise repairs and quick assemblies in home and workshop.
  • Bonding edges, rims, and connections in corners for a clean result.
  • Installation and repair work for installers and kitchen contractors.
  • Hobbies, models, and quick DIY repairs.
  • Assembly and repair labs for short and focused tasks.

Technical Data

  • Product Type: Glue and accelerator set
  • Glue Type: Rapid cyano-acrylate
  • Glue Model: 705
  • Accelerator Type: Organic, for external/ventilated use
  • Accelerator Model: ACTIVATOR 705
  • Finish: Transparent
  • Grip Time: approx. 5–15 seconds with accelerator
  • Supported Materials:
    • Wood and MDF
    • Various metals
    • Rubber and EPDM
    • Cardboard and rigid foam
    • Some hard plastics
  • Compatibility Note: Mismatch possible for polyethylene/polypropylene/teflon. Preliminary test recommended.
  • Set Contents: 705 rapid cyano-acrylate glue in dropper bottle + ACTIVATOR 705 organic accelerator spray

Important Notes and Warnings

  • Work in Ventilated Environment It is recommended to use in a ventilated place and avoid direct inhalation of vapors.
  • Skin and Eye Contact Avoid contact and act carefully during bonding and spraying.
  • Preliminary Test You should check compatibility and effect on material in a hidden corner before full use.
  • Maintain Finish Be careful on shiny surfaces and ensure clean work to prevent clouding.
  • Correct Storage Store in a cool, dry place and close the glue bottle well after use.

Questions and Answers

  • Who is the set suitable for? For carpenters, installers, and kitchen contractors, and also for hobbyists and quick DIY work at home and in the workshop.
  • What is the advantage of using an accelerator together with the glue? The accelerator allows for a particularly quick grip and shortens the waiting time, so work can proceed efficiently.
  • What types of work is this particularly suitable for? For edge and rim works, small repairs, and point connections where precision and a clean result are important.
  • Can this be used on plastic? On some hard plastics yes, but a preliminary test is recommended as mismatch to certain materials is possible.
  • How is it recommended to work to get a clean result? Work on surfaces clean of dust and grease, apply a thin layer of glue, and gently spray the accelerator before bonding.

*Images for illustration purposes only.