Skip to content
LEDMARKET
Power Cable Connector for 8mm COB LED Strip

Power Cable Connector for 8mm COB LED Strip

Cikkszám
5295
Márka
Ledmarket
Minimális rendelés
2

Ár ajánlatkérésre

A termék nagykereskedelmi feltételeit kérésre állítjuk össze. Adja hozzá a listához a szükséges mennyiséggel.

Készlet a forrásnál (kiskereskedelmi): Raktáron a forrásnál. A forrás kiskereskedelmi készlete nem garantálja a nagy tételek elérhetőségét.

A szállítási díjat külön ajánljuk

Leírás

Transparent "Snap-On" Connector for COB Strip End

Connector with 5 cm power cable for 8mm wide COB LED strips, providing a pair of short wires (red/black) for power input – a fast solderless solution. The connector is designed for the immediate connection of single-color COB strips (2-pin) to a power source/controller: slide the end of the strip all the way in, ensure correct polarity, close until it clicks, and get an organized output with +/− wires.

Clean and Fast Connection for Field Work and Upgrades

The 3–5 cm pigtail length provides a flexible and clean connection inside profiles and junction boxes. Ideal for field installations, sampling, and service repairs, without a soldering iron and without the mess of solder.

Three-Step Installation Without Hassle

Cut the strip at the marked cutting point, insert the end of the strip into the connector all the way according to the + / − polarity markings, close until it clicks, and check illumination. For long strips, consider injecting power from both ends to achieve a uniform result.

Product Details

Advantages

  • Solderless: Fast and clean "click" connection, without a soldering iron or solder.
  • Compatible with 8mm COB Strips: Focused solution for 2-pin strips for immediate connection to power source/controller.
  • Built-in Pigtail: 3–5 cm red/black wires for clear polarity and organized output.
  • Saves Time in the Field: Especially suitable for quick projects and service, even in narrow aluminum profiles.
  • Stable Connection: Locking cover that reduces movement and disconnections.
  • Economic Packaging: Sold as a single unit.

Recommended Uses

  • Powering 8mm COB strips (220V / 24V) in lighting profiles.
  • Test, demo, and sampling connections without soldering.
  • Quick repairs and easy strip replacement in the field.
  • Additional power injection at the ends of long strips.

Technical Data

  • Compatible Strip Type: Single-color COB, 8mm width, 2 pins (+/−)
  • Packaging: 1 connector
  • Not suitable for: RGB/RGBW, 10/12 mm strips, or COB strips with a different pitch that is not 2-pin

Q&A

  • Is soldering required to work with the connector? No. This is a fast "click" connection designed to work without soldering and without dealing with solder.
  • How to ensure a correct connection before closing? Insert the end of the strip all the way, check the alignment according to the + / − polarity markings, then close until you feel a click.
  • What is the purpose of the red/black wire output? To provide a tidy and convenient output for power input, with clear identification of plus and minus.
  • When is this an especially good solution? In field installations, testing and sampling, and service repairs where you want to work fast and clean without soldering equipment.
  • What to do if the connection doesn't "catch" well? Ensure the copper contacts on the strip are clean and aligned and that the strip was inserted all the way before closing.

*Images for illustration purposes only